#./configure --prefix……檢查編輯環境時出現：
checking for APR... no
configure: error: APR not found . Please read the documentation.
可以用./configure –help | grep apr 查看幫助。
--with-included-apr Use bundled copies of APR/APR-Util
--with-apr=PATH prefix for installed APR or the full path to apr-config
--with-apr-util=PATH prefix for installed APU or the full path to
安裝APR(Apache Portable Runtime )
下載：http://apr./download.cgi
#cd /tmp/52lamp/ //源碼存放位置
#tar -zxvf apr-1.4.2.tar.gz //unzip -o apr-1.4.2.zip
#cd apr-1.4.2
#./configure
#make
#make install
再次檢查編譯環境出現
checking for APR-util... no
configure: error: APR-util not found . Please read the documentation.
#./configure –help | grep apr-util
--with-apr-util=PATH prefix for installed APU or the full path to
下載：http://download./download/0001000/472.shtml
#tar -zxvf apr-util-1.3.9.tar.gz
#cd apr-util-1.3.9
#./configure --prefix=/usr/local/apr-util --with-apr=/usr/local/apr
#make
#make install
./configure仍提示APR-util not found，增加--with-apr=/usr/local/apr --with-apr-util=/usr/local/apr-util后出現
configure: error: pcre-config for libpcre not found. PCRE is required and available from http:///
#./configure –help | grep pcre
--with-pcre=PATH Use external PCRE library
下載：http:///projects/pcre
#unzip -o pcre-8.10.zip
#cd pcre-8.10
#./configure --prefix=/usr/local/pcre
#make
#make install
繼續安裝Apache/httpd，./configure 時加上參數 --with-apr=/usr/local/apr/ --with-apr-util=/usr/local/apr-util/ --with-pcre=/usr/local/pcre，這個問題就解決了
注意：Apache在安裝時不會檢查參數是否正確，錯誤的參數會直接被丟棄，不會報告給用戶。但可以使用echo $?命令檢查是否有錯誤，當輸出結果為0時表示沒有錯誤。
#echo $?
0
#make
#make install
復制Apache啟動文件
#cp /usr/local/httpd/bin/apachectl /sbin/
啟動Apache
#apachectl start
設置Apache開機自啟動
#vi /etc/rc.d/rc.local
增加一行 /sbin/apachectl start
或者將httpd服務添加到ntsysv服務管理工具
#apachectl stop //關閉Apache以免不必要的麻煩
#cp /usr/local/httpd/bin/apachectl /etc/rc.d/init.d/httpd
#vi /etc/rc.d/init.d/httpd
修改為
#!/bin/sh
#
#chkconfig: 345 85 15 //#不能省略，注意空格
#description: httpd for 52lamp 20101016 21:54 //任意字符串
#
......
第二行中345的含義：
# 0 - operation completed successfully
# 1 -
# 2 - usage error
# 3 - httpd could not be started
# 4 - httpd could not be stopped
# 5 - httpd could not be started during a restart
修改有關權限
#cd /etc/rc.d/init.d/
#chmod a+x httpd
#chkconfig --add httpd
#ntsysv
httpd已經在列表中，按F1可以看到剛才編寫的服務描述httpd for 52lamp 20101016 21:54。
#apachectl start
#ps -e |grep httpd
23247 ? 00:00:00 httpd
23248 ? 00:00:00 httpd
23249 ? 00:00:00 httpd
23251 ? 00:00:00 httpd
23252 ? 00:00:00 httpd
在瀏覽器中輸入127.0.0.1，看起來一切正常；但是局域網內其他電腦不能訪問！
#service iptables stop
如果不想關閉防火墻，放開80端口即可。
#vi /etc/sysconfig/iptables
增加一行-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT
#service iptables restart //重啟防火墻
現在一切OK
