前段時間完成了一個項目，但是現在該網站訪問不了，真是郁悶，主機重啟之后，網站運行正常，“狗”（google）也放了，“csdn”也帖了，沒有解決，苦惱，后來發現是數據庫死鎖造成的問題。 通過這個問題，我對數據庫思索也小小研究了一下，寫一點相關知識。

    死鎖原因：

 提取查詢數據相應數據，修改Stat表，都是修改同一條數據，進行大數據量的操作，多用戶同時操作時，造成數據庫死鎖和阻塞；

相關知識：

1、SQL死鎖和阻塞：http://searchdatabase./tips/275/2080775.shtml

2、死鎖測試方法：程序中將數據庫操作，循環操作1萬次，打開多個窗口同時執行

3、查找數據庫死鎖原因的方法：http://www./html/57/785.html

下面的SQL語句運行之后，便可以查找出SQLServer的死鎖和阻塞的源頭

use master
go
declare @spid int,@bl int
DECLARE s_cur CURSOR FOR
select  0 ,blocked
from (select * from sysprocesses where  blocked>0 ) a
where not exists(select * from (select * from sysprocesses where  blocked>0 ) b
where a.blocked=spid)
union select spid,blocked from sysprocesses where  blocked>0
OPEN s_cur
FETCH NEXT FROM s_cur INTO @spid,@bl
WHILE @@FETCH_STATUS = 0
begin
if @spid =0
            select ‘引起數據庫死鎖的是: ‘+ CAST(@bl AS VARCHAR(10)) + ‘進程號,其執行的SQL語法如下‘
else
            select ‘進程號SPID：‘+ CAST(@spid AS VARCHAR(10))+ ‘被‘ + ‘進程號SPID：‘+ CAST(@bl AS VARCHAR(10)) +‘阻塞,其當前進程執行的SQL語法如下‘
DBCC INPUTBUFFER (@bl )
FETCH NEXT FROM s_cur INTO @spid,@bl
end
CLOSE s_cur
DEALLOCATE s_cur

exec sp_who2

4、查看當前進程,或死鎖進程,并能自動殺掉死進程：http://www./blog/news.asp?id=363

/*--處理死鎖

查看當前進程,或死鎖進程,并能自動殺掉死進程

因?yàn)槭轻槍?duì)死的,所以如果有死鎖進程,只能查看死鎖進程
當然,你可以通過參數控制,不管有沒有死鎖,都只查看死鎖進程

--鄒建 2004.4--*/

/*--調用示例

exec p_lockinfo
--*/
create proc p_lockinfo
@kill_lock_spid bit=1, --是否殺掉死鎖的進程,1 殺掉, 0 僅顯示
@show_spid_if_nolock bit=1 --如果沒有死鎖的進程,是否顯示正常進程信息,1 顯示,0 不顯示
as
declare @count int,@s nvarchar(1000),@i int
select id=identity(int,1,1),標志,
進程ID=spid,線程ID=kpid,塊進程ID=blocked,數據庫ID=dbid,
數據庫名=db_name(dbid),用戶ID=uid,用戶名=loginame,累計CPU時間=cpu,
登陸時間=login_time,打開事務數=open_tran, 進程狀態=status,
工作站名=hostname,應用程序名=program_name,工作站進程ID=hostprocess,
域名=nt_domain,網卡地址=net_address
into #t from(
select 標志=‘死鎖的進程‘,
spid,kpid,a.blocked,dbid,uid,loginame,cpu,login_time,open_tran,
status,hostname,program_name,hostprocess,nt_domain,net_address,
s1=a.spid,s2=0
from master..sysprocesses a join (
select blocked from master..sysprocesses group by blocked
)b on a.spid=b.blocked where a.blocked=0
union all
select ‘|_犧牲品_>‘,
spid,kpid,blocked,dbid,uid,loginame,cpu,login_time,open_tran,
status,hostname,program_name,hostprocess,nt_domain,net_address,
s1=blocked,s2=1
from master..sysprocesses a where blocked<>0
)a order by s1,s2

select @count=@@rowcount,@i=1

if @count=0 and @show_spid_if_nolock=1
begin
insert #t
select 標志=‘正常的進程‘,
spid,kpid,blocked,dbid,db_name(dbid),uid,loginame,cpu,login_time,
open_tran,status,hostname,program_name,hostprocess,nt_domain,net_address
from master..sysprocesses
set @count=@@rowcount
end

if @count>0
begin
create table #t1(id int identity(1,1),a nvarchar(30),b Int,EventInfo nvarchar(255))
if @kill_lock_spid=1
begin
declare @spid varchar(10),@標志 varchar(10)
while @i<=@count
begin
select @spid=進程ID,@標志=標志 from #t where id=@i
insert #t1 exec(‘dbcc inputbuffer(‘+@spid+‘)‘)
if @標志=‘死鎖的進程‘ exec(‘kill ‘+@spid)
set @i=@i+1
end
end
else
while @i<=@count
begin
select @s=‘dbcc inputbuffer(‘+cast(進程ID as varchar)+‘)‘ from #t where id=@i
insert #t1 exec(@s)
set @i=@i+1
end
select a.*,進程的SQL語句=b.EventInfo
from #t a join #t1 b on a.id=b.id
end
go

OK，多多指教